EMPEROR 2
u
Model 007 & 007S
39
First time
Second time
Third time
Fourth time
– When pressing the [
DISPLAY
] button on the remote
control again, it will turn off the OSD.
CD/VCD OSD Modes
There are two OSD display modes available when
playing a VCD, and Audio CD disc.
Mode 1
Shows the status of the pressed button and some spe-
cial messages are displayed on the screen as previous
description.
Mode 2
Shows the playback time information of a disc.
PBC ON (VCD 2.0 above only)
– When pressing the [
OSD
] button on R/C, the infor-
mation OSD will display on the screen in the sequen-
ce as shown below:
1. SINGLE ELAPSED
2. SINGLE REMAIN
PBC OFF or Audio CD playback:
1. SINGLE ELAPSED
2. SINGLE REMAIN
3. TOTAL ELAPSED
4. TOTAL REMAIN
– When pressing the [
DISPLAY
] button on the remote
control again, it will turn off the OSD.
BASIC OPERATION
OF PLAYBACK
Preparation
– If a television set is used, turn on its power and se-
lect the appropriate input AV, S-Video VGA. If the
VGA connection is used then the TV will switch to
the correct input when the DVD player is turned on.
– If a sound system is used, turn on the amplifier first
and make sure its outputs are set properly.
START Playback
1. Turn on the DVD player.
2. Press the [
OPEN/CLOSE]
button to open the disc tray.
3. Place a disc onto the tray and make sure that it is
placed squarely on the tray.
4. Press the [
OPEN/CLOSE
] or [
PLAY/PAUSE
] button
to play the disc.
NOTES
: When using a DVD disc, some menu selec-
tions and some DVD playback functions are available du-
ring playback. When using a VCD disc with PBC, the PBC
menu will be displayed on the screen. You can use the
PBC menu, or press the PBC button to set PBC off and the
disc will play immediately. For a VCD disc without PBC or
an Audio CD, the disc will be played immediately.
