EMPEROR 2
u
Model 007 & 007S
36
COMPRESSION
„Compression Range” is the difference between the
maximum level and the minimum level of sounds. Sounds
on a movie originally designed for movie theaters featu-
re a very wide compression range, so sometimes it is not
suitable for home use. Depending on the condition of your
listening environment, Compression function can redu-
ce the instant sound effect alteration of the movie while
playing back. When seeing movies in the night, turn this
function on to avoid the suddenly loud sound to influence
your neighbors. (Default value is FULL, no compression
to be done.)
NOTES
: This function works only during playback of
Dolby Digital recorded discs. The level of Dynamic Range
Reduction may differ depending on the DVD discs.
LINEAR PCM SETUP
This option sets the audio output format sent using the
unit’s coaxial digital audio output.
Linear PCM OUT
–
LPCM 48K
- In the Linear PCM setting, “48K” me-
ans “the digital audio output maximum sampling
rate is 48KHz”; therefore, when the title’s encoding
sampling rate* is 96KHz, the output will be forced
converted to 48KHz.
–
LPCM 96K
- If “96K” is selected, then the maximum
output sampling rate is 96KHz and no conversion will
take place.
PREFERENCES
Preferences allow you to set the default TV TYPE,
VIDEO OUTPUT, AUDIO, SUBTITLE, DISC MENU, PA-
RENTAL, PASSWORD, factory DEFAULTS and SMART-
NAVI of this player. This setting is only available when the
DVD player is in the STOP mode by pressing the [
STOP
]
button twice and then press the [
SETUP
] button to call on
the “GENERAL PAGE” fore selection settings.
NOTES
:
Pressing the [
STOP
] button once only pause the playback,
to stop the playback completely by pressing [
STOP
] twice.
TV TYPE
–
MULTI
- The DVD player will choose the correct
system to display the playback of inserted disc.
–
NTSC
- The DVD player will output in NTSC format
regardless of what format the disc was designed for.
–
PAL
- The DVD player will output in PAL format re-
gardless of what format the disc was designed for.
Note
: Press [N/P] directly on the Remote Control to alter
NTSC, PAL or MULTI of TV System being played.
VIDEO OUTPUT
