EMPEROR 2
u
Model 007 & 007S
35
REAR DELAY
Adjust the delay time of REAR output.
Note
: Please set the “REAR” item to ON first.
TEST TONE
Test the output ability of left, center, right, right surround,
and left surround speakers in sequence.
Note
: Please set the “DOWN MIX” item to OFF first.
AUDIO SETUP
There are five available settings:
AUDIO OUT
You can choose to send the player’s audio signals to an
external receiver using the following outputs:
–
SPDIF/RAW
: Set to this selection will output the raw
bit stream signal of Dolby
®
Digital or DTS from the
coaxial jack. In order to enjoy Dolby
®
Digital DTS
discs, this unit’s digital output jack must be connec-
ted to the digital-input jack of a Dolby
®
Digital or DTS
compatible receiver or processor.
–
SPDIF/PCM
: PCM stands for Pulse Code Modula-
tion and is digital audio. Connecting this unit to an
amplifier with a built-in D/A converter can play the
same digital audio format as on CDs. Additionally,
2-channel analogue audio will output from the audio
output jacks of amplifier.
NOTES
: Analogue and digi-
tal audio signals cannot output simultaneously. This
player has a conversion function for converting Do-
lby
®
Digital and MPEG audio into the LPCM format.
This allows playback of CDs with the regular play-
back system without the need for a special converter.
PROLOGIC
ProLogic Mode will create pseudo 5.1 Sound from
normal stereo.
DUAL MONO
There are four available modes: STEREO, L-MONO,
R-MONO, and MIX-MONO.
Audio output description
