USER’S MAnUAL
21
Troubleshooting
Symptom
Cause
Solution
No sound
Cables not properly connected
Disc warped or dirty
Player in mute status
Connect cables securely
Clean your disc
Press MUTE button again
No picture
Cables not properly connected
Correct input not selected on TV
Connect cables
Reset the AV/TV status of your TV set
No color
TV system not right
TV set color not properly adjusted
Press PAL/NTSC button
Adjust color of the TV set
No disc reading
No disc in the player
Disc not properly loaded
Condensation on the laser head
Load a disc
Reload a disc, with the label side facing up
Turn on the player, unload the disc and leave it
on for about an hour
Remote control failure
Remote control not pointing to the sensor
window
Remote control’s operating distance more
than B meters away from the TV
Batteries low
Point the remote at the unit
Use the remote control within B meters of the
unit
Replace the batteries
Temporary function failure
Badly fabricated disc used
Wrong buttons pressed
External electrical interference
Wait 5-10 secs and the player will return to
normal operation once more
Wait l-3 seconds and press correct button
Turn of the player for1 — 2 mins then switch
back on lf problem persists relocate the player
or eliminate source of interference.
Rolling Picture
TV set not properly adjusted
Incorrect output format on DVD unit
Readjust TV system
Select correct output format for your TV (PAL/
NTSC)
