USER’S MAnUAL
14
User’s Manual
To reduce the risk of fire and electrical shock, do not remove
the cover of this unit, do not expose this unit to rain or moisture.
Please refer all servicing difficulties to qualified technicians.
This lightning flash arrow symbol in a triangle, is intended to
alert users to the present of non-insulated high voltage within
the products enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to person. The exclamation
point symbol in a triangle is intended to alert users to the pres-
ence of important operating and maintenance instructions in
the literature accompanying the unit.
This marking indicates the presence of laser beams used in this
unit, and CLASS 1 refers to laser beams of the weaker class. There
is no danger of hazardous radiation outside this unit.
Read through this instruction manual before installation
z
and use.
Do not touch the power plug with wet hand.
z
Switch off the main power when the unit is not in use.
z
(Disconnect the power plug from the power outlet when
you do not intend to use the unit for a prolonged period
of time.) Before moving the unit, remove the disc from the
unit/ tray first.
Do not open the cover or touch any of the components
z
exposed out of the unit, only for qualified technicians.
Do not expose the unit under direct sunlight or nearby
z
objects that radiate heat to avoid damage the unit.
Do not place the unit in moist and humid conditions, which
z
effect the pick-up of the unit lead to out of work.
Place the unit on a flat surface and ventilative condition.
z
Please ensure the ventilation holes are not covered to avoid
overheating and malfunction.
Clear the panel and case with soft dry cloth only, do not
z
apply any kind of thinner, alcohol or sprays
The apparatus shall not be exposed to dripping or splashing
z
and that no objects filled with liquids, such as vases, shall
be placed on the apparatus
unplug the apparatus when not using for a long time ori-
z
ented to disconnect from the Mains power
No naked flame sources, such as lighted candles, should
z
not be placed on the apparatus.
Make sure there is free circulation of air (do not place the
z
device on shelves, on a thick carpet, on a bed, or anywhere
that obstructs the ventilation slots, and leave at least 10cm
clearance on all sides.
The apparatus shall not be exposed to dripping or
z
splashing.
The mains plug is used as the disconnect device, the discon-
z
nect device shall remain readily operable.
If the electric cable is damaged, it must be replaced by the
manufacturer, or by the qualification persons, in order to avoid
a danger.
The product’s function maybe reset when it is subjected to
electrostatic discharge disturbance. Just follow the instruction
described in this manual to set the function again for normal
operation.
During electrostatic discharge and the strong electromagnetic
field, the product may malfunction, then press “POWER” button
and the product will return to normal performance.
In view of the usage safety, it is required to install an all-pole
z
power switch in the electronic appliances of building, of at
least 3mm space between each contacting points.
Macrovision
This product incorporates copyright protection technology
that is protected by method claims of certain U.S patents and
other intellectual property rights owned by Macrovision Corpora-
tion, and is intended for home and other limited viewing uses
only unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
Manufactured under license from Dolby Laboratories.
„Dolby”, and the double-D symbol are trademarks of Dolby
Laboratories.
