AVS 24v S-SERIES INSTALLATION MANUAL - GEN 2 VER 4
31
3 Extra Control Channels from AVS S-Series remote
This will allow you to control 3 extra channels from the alarm remotes in addition to the boot pop channel on the
alarm.
These 3 channels on the RXPRO can be programmed to latch, momentary pulse or timed pulse and have N/O and
N/C contacts on channel 1, 2 and 3 and N/O contacts only on channel 4. The RCX-4 can also receive these signals
and will put out a basic low current negative.
Note: If you want to use the alarm boot pop or alarm panic channel be aware that Ch 2 on the RXPRO or RCX-4 will
also activate.
Parts required:
RXPRO receiver or RCX-4
AVS Star rated alarm system
System set up:
1.
Learn both alarm remotes into the RXPRO/RCX-4 receiver, (at step 7 of the RXPRO remote learning
instructions push the
button on the AVS waterproof remotes).
Operation:
Alarm remote
button
1 second button push
3/5 second button push
RXPRO Ch 4
NA
Arm/disarm alarm and lock/unlock
the doors
NA
RXPRO Ch 2
Boot pop or T/T shut off
RXPRO Ch 3
Alarm panic
