19_J05xxx_ SPB 358 E&C.indd 4
9/1/19 5:10 PM
Caution:
Do not use parts and components other than those provided in the
packaging or recommended.
6mm
2.
Installation
2.1
Option 1: Wall-mounting
Drill the holes and install the device on the wall through the 2 reserved holes
(
6mm) with expansion screws. Tighten the self-locking nuts to secure the
device. Please only use the expansion screws (
6 mm) provided in the
packaging to do the installation. Alternatively, the nylon expansion screws could be
used depending on the wall conditions. The schematic is shown below:
4
