MANN+HUMMEL senzit, Manual, Page: 3 / 27

2 1 | ENGLISH
English
Important Information / Before Installing Device 2
Device Parts 3
Items Included in Package / Recommended Items to Assist with Installation (Not Included) 4
Remote Mount Installation (Recommended) 5
Direct Installation to Metal Service Port of Air Duct 7
Wiring Instructions 9
After Installation / Troubleshooting 11
Appendix A: LED Indicator Status 12
Table of Contents
The Senzit Monitoring Device connects to the air housing service port and requires basic wiring for
power supply. Refer to this instruction guide for correct installation and wiring procedures. Incorrect
installation or wiring may result in injury or equipment damage and may void warranty.
Ensure mounting location is sufficient distance from high heat sources such as turbos or exhaust manifolds
to avoid heat damage. Senzit Monitoring Device can become damaged if exposed to excessive heat.
Device operating temperatures are -13° to 176°F (-25° to 80°C).
Product input voltage 9V~32V.
Senzit hardware comes with a standard 1-year WIX warranty.
For information, visit http://www.wixfilters.com/warranty/doc/wix_US_English.pdf
**CAUTION** :
Disconnect negative battery cable to avoid short circuits. Read all manufacturer’s warnings regarding electrical systems
in your equipment. A volt-ohm meter is recommended when checking wiring.
Download Senzit App from App Store or Google Play Store. Tap “add device” and scan QR Code
on the device or device packaging. Then, follow the in-app prompts.*
* A delay in information such as activity history is possible.
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark
of Apple Inc., registered in the U.S. and other countries. Google Play and the Google Play logo are trademarks of Google Inc.
Important Information
Before Installing Device