46
A: Temperature is too high; Or the filament is carbonized or liquefied(PLA will get
liquefied if over-high temperature, ABS will get carbonized if over-high temperature)
If still cannot solve the problem, please contact with our technical support team at
Q: Model surface is unsmooth
Printing Problems
A: Reduce the retraction travel; Or reduce minimal extrusion before retracting;
Note:
Please reduce the retraction amount if retracting frequently.
Q: Model is easy to fall off
A: Having not used the Kapton tape or the Kapton tape loses stickiness; Or the model
bottom is too small, you can use a hot melting glue gun to help; Adding support
structure to support model; Using the feature in MankatiUM of Advance-Quality-Cut
off object bottom.
Q: There is the joint dislocation between the parts while dual color printing.
A: Adjusting the feature of the relative position coordinate in MankatiUM: "Machine-
Machine settings-Extruder 2".
Q: Hard to remove the support structure
A: Turn the direction of model properly in MankatiUM; The support density should not be
set too high; Divide the model into different parts to print if necessary.
Q: Failed prototyping of small model
A: If printing a small model, the extruder will always move in a small space, so the heat will
be concentrated in the model, and hard to be distributed.
That's why it is hard to print the very small model.
The solution is to print 3-4 pieces of the small model together. If so, the extruder will
move among different models, leaving time for heat dissipation.
Q: Mankati Fullscale XT stops suddenly sometimes
A: 1. Gcode file saved incompletely.
2. USB connection cable has problem while choosing online printing or computer is in
standby model.
3. Something wrong with the power outlet.
4. If printer cannot be turned on after stopping, it means that the fuse on the power outlet
should be blown out.
Q: Some part of the object unable to be modeling.
A: Try the support functions in the MankatiUM software.