34
Leveling Build Plate
3.
Now, begin to adjust the four corners.
Use a name card between the extruder and the hot bed,
move it back and forth. You should feel some friction on
the card but still be able to easily pass the card between the
plate and the extruder nozzles without tearing or damaging
the card.
If the friction is too big, it means the gap between nozzle
and plate is too small, you need to reduce plate height by
loosening the screw.
On the contrary, if almost no friction, it means the gap is
too big, you need to increase plate height by tightening the
screw.
4.
Adjust next three corners in anti-clockwise direction by
same method.
5.
Do adjust all four corners repeatedly at least 3-4 times to
ensure the best gap you get.