36
Print from SD Card
1.
Input the 3D modeling
files in our slicing software
(Mankati UM), and output
the Gcode files in the SD
card.
Note:
It is better to use the
default settings for the first
run.
3.
Choose “Print from
SD card”, select the right
Gcode.
4.
When your 3D print
finished, the build plate will
move down and be heated
to 50
℃
automatically so
as to take out the model
more easily.
Use a shovel to take it out
gently to avoid the damage
of the model.
Note:
If the model is difficult to be removed, you can raise the build plate temperature to 60.
Warning:
Do not touch the nozzle until it is cooled down totally (The temperature on LCD must be
lower than 30 degrees)
2.
Insert the SD card into
Mankati Fullscale XT.