www.mankati.com
34
Print from SD Card
1.
Import the .stl format
model files in our slicing
software (Mankati UM), and
output the Gcode files in the
SD card.
Note:
It is better to use the
default settings for the first
run.
3.
Choose “Print from SD
card”, then select your
Gcode file.
4.
When your printing
finished, the build plate will
move down and be heated
to 50
℃
automatically for
taking your model off more
easily.
Use shovel to take it out
gently to avoid the damage
of the heat bed glass and
your model.
Note:
If the model is difficult to be off, you can raise the build plate temperature to 60. Too much
power pulling the model will cause damage to the glass surface! This kind of damage during use is NOT
covered by the warranty of “free parts replacement service”. Please do the removing carefully!!
Warning:
Do not touch the nozzle while it is totally cooled down. Wait until the actual temperature on
LCD is lower than 30 degrees.
2.
Insert the SD card into
Mankati Fullscale XT Plus.