www.mankati.com
32
Leveling Build Plate
3.
If the gap distance
between nozzles and build
plate is still too big ( more
that 4-5mm) after “Auto
home”, please adjust the
limit stopper on the rear
side of your machine.
Loosen the 2 screws then
move it upwards a few
mm.
6.
Repeat to adjust the 4
corners a little at least 3-4
times to ensure the best
gap distance.
4.
Now, you can start to
adjust the four corners:
Insert a business card
into the gap between
the extruder and the hot
bed, then move it back
and forth. You should
feel some friction on the
card but still able to easily
move the card between
the gap without tearing or
damaging the card.
5.
In the same way, adjust
the left 3 corners in anti-
clockwise direction.