Maintenance
Section 4
4-4
CLEANING PROCEDURE
Ice machine cleaner is used to remove lime scale or
other mineral deposits. It is not used to remove algae
or slime. Refer to the section on Sanitizing for
removal of algae and slime.
Step 1
Set the toggle switch to the OFF position
after ice falls from the evaporator at the end of a
Harvest cycle. Or set the switch to the OFF position
and allow the ice to melt off the evaporator.
CAUTION
Never use anything to force ice from the
evaporator. Damage may result.
Step 2
Remove all ice from the ice storage bin.
Step 3
To start clean cycle, move the toggle switch
to the WASH position. The water will flow into the
water trough, then down the drain through the water
overflow tube.
Step 4
Wait about three minutes or until water starts
to flow over the evaporator.
Step 5
Add 45ml (1.5 oz.) of Manitowoc Ice
Machine Cleaner to the water trough.
Step 6
The ice machine will automatically time out a
ten-minute cleaning cycle, followed by eight rinse
cycles, and then stop. This entire cycle lasts
approximately 43 minutes.
Step 7
When the cleaning process stops, move the
toggle switch to the OFF position. Refer to
“Sanitizing Procedure”.
NOTE: If the toggle switch is moved to the off
position, the clean cycle will be terminated
.
SANITIZING PROCEDURE
Use sanitizer to remove algae or slime. Do not use it
to remove lime scale or other mineral deposits.
Step 1
Set the toggle switch to the OFF position
after ice falls from the evaporator at the end of a
Harvest cycle. Or set the switch to the OFF position
and allow the ice to melt off the evaporator.
CAUTION
Never use anything to force ice from the
evaporator. Damage may result.
Step 2
Remove all ice from the ice storage bin.
Step 3
To start the sanitizing cycle, move the toggle
switch to the WASH position. The water will flow
into the water trough, then down the drain through
the water overflow tube.
Step 4
Wait about three minutes or until water starts
to flow over the evaporator.
Step 5
Add 45 ml (1.5 oz.) of Manitowoc Ice
Machine Sanitizer to the water trough.
Step 6
The ice machine will automatically time out a
ten minute sanitizing cycle, followed by eight rinse
cycles, and then stop. This entire cycle lasts
approximately 43 minutes.
Important
Sanitize the ice bin with a solution of 30 ml (1 oz.)
of sanitizer with 15 ml (4 gal.) of water.
Step 7
When the sanitizing process stops, move the
toggle switch to the ON position to start ice making
again.
NOTE: If the toggle switch is moved to the OFF
position, the sanitizing cycle will be terminated.
