1/12
13
Clean Blended Ice Machine (BIM-8)
(continued)
©McDonald’s Corporation · Planned Maintenance Manual · October 2011
Page 2 of 5
Bl
e
Blended Ice Machine Models
M
S-8-1H, MS
-8-1LH
, MS
-8-E
H,
MS
-8-E
LH, MS
-8-
BH, MS
-8-B
LH
, MS
-8-CH, MS
-8-CLH,
M
S000A
03
, MS
000A
04
Weekly
BE 23 W1
6
Remove product bins and
bags.
Remove each product bag
from the product bin and
place in walk-in cooler. Take
product bins to 3-
compartment sink and wash,
rinse and sanitize. Allow to
air dry.
7
Connect cleaning tubes.
Connect one tube from the
cleaning tubes to each inlet
line. Insert the free end of the
tubes into the bucket of clean
SolidSense APSC solution.
All lines must be cleaned
including unused.
SolidSense APSC solution
8
Place black cleaning pitcher
on pitcher pad.
9
Press Next.
The message window will
display: “APSC cleaning of
Strawberry Banana Line”,
then change to the next flavor
until all lines have been
cleaned. If cleaner solution
runs low, press Pause, refill
the bucket with cleaner
solution and press Resume.
After the last line is cleaned,
the next cleaning screen will
appear.
10
Remove tubes from the APSC
bucket and place into the
warm water RINSE bucket.
11
Press Next.
The message window will
display: “Rinse of Strawberry
Banana Line”, then change to
the next flavor until all lines
have been rinsed. If water
runs low, press Pause, refill
the bucket with warm water
and press Resume. After the
last line is cleaned, the next
cleaning screen will appear.
12
Remove tubes from RINSE
bucket and place into the
warm water SANITIZE bucket.
KAY 5 Sanitizer
13
Press Next.
The message window will
display: “Sanitizer fill of
Strawberry Banana Line”,
then change to the next flavor
until all lines have been
sanitized. If sanitizer solution
runs low, press Pause, refill
the bucket with sanitizer
solution and press Resume.
14
Sanitize Hold
After the last line is sanitized,
“Sanitize Hold” will appear,
and then the next cleaning
screen will appear.
15
Remove tubes from Sanitize
solution and lay across the top
rim of the bucket.
16
Press Next.
The message window will
display: “Auto purge of
Strawberry Banana Line”,
then change to the next flavor
until all lines have been
purged. The next cleaning
screen will appear.
17
Disconnect the cleaning tubes
from each product line.
Chemicals
continued
X
Chemicals
Summary of Contents for Multiplex Ms-8
Page 59: ...1 12 59 Blender Scale Schematic Shaver Schematic ...
Page 62: ...62 1 12 Notes ...
Page 63: ...1 12 63 Notes ...
