Maintenance
Section 4
4-4
Part Number 80-1634-3
SANITIZING PROCEDURE
Use sanitizer to remove algae or slime. Do not use it to
remove lime scale or other mineral deposits.
Step 1
Set the toggle switch to the OFF position after
ice falls from the evaporator at the end of a Harvest
cycle. Or, set the switch to the OFF position and allow
the ice to melt off the evaporator.
Step 2
Refer to Removal of Parts For Cleaning/
Sanitizing and remove ice machine parts.
Step 3
Mix a solution of water and sanitizer.
Step 4
Use the sanitizing solution and a sponge or
cloth to sanitize (wipe) all parts and interior surfaces of
the ice machine. Sanitize the following areas:
A. Side walls
B. Base (area above water trough)
C. Evaporator plastic parts
D. Bin or dispenser
Step 5
Rinse all sanitized areas with clear water.
Step 6
Install the removed parts, restore power and
place toggle switch in the ice position.
!
Caution
Never use anything to force ice from the evaporator.
Damage may result.
!
Warning
Disconnect electric power to the ice machine (and
dispenser if applicable) at the electric switch box
before proceeding.
Solution Type
Water
Mixed With
Sanitizer
4 gal. (15 l)
3 oz (90 ml) sanitizer