PRINTED IN U.S.A.
37
50960025/CP0514
Pre-Start Walk-Around Inspection Checklist
Note the condition of safety decals during the walk-around
inspection. Replace missing or illegible safety decals.
o
1.
Attachment Tool:
Check for broken, missing or
damaged parts. When using a personnel work plat-
form, check to see if the platform meets ANSI/ITSDF
standards and that it is secured to the forks and fork
carriage. When using forks, check for welds, cracks
or misalignment. Replace the forks in sets when the
condition of the forks is questionable.
IMPORTANT:
DO NOT use forks that have been
repaired by welding.
o
2.
Attachment Tool Mount:
No loose or missing parts;
no visible damage.
o
3.
Attachment Tool Mounting Pins:
No visible dam-
age; pin fit is secure and properly lubricated.
o
4.
Boom Chain:
No loose or missing parts; no visible
damage; sheave pin fit is secure and properly lubri-
cated.
o
5.
Boom Sections and Wear Pads:
No loose or missing
parts; no visible damage or excessive wear.
NOTE:
Wear pads that measure 3/8” (9.5 mm) thick or
less need to be replaced.
o
6.
Outriggers (when equipped):
Properly secured;
pads in downward position; no visible damage; no
loose or missing parts; no leaking from the cylinder.
o
7.
Boom Angle Indicator:
Properly secured; no visible
damage; bubble is visible.
o
8.
Tire and Wheel Assemblies:
Properly secured; no
loose or missing lug nuts; no visible tire damage (cuts
or abrasions); proper inflation.
o
9.
Front and Rear Axles:
No loose or missing parts; no
visible damage; tie rod end studs locked; no evidence
of leaking; properly lubricated.
o
10. Operator Compartment:
o
Seat belt undamaged; operates properly; mounting
hardware secure.
o
Switches and levers undamage;
o
no loose or missing parts;
o
load charts properly secured and legible;
o
levers and switches operate properly; control mark-
ings legible;
o
frame level indicator secured and undamaged, bub-
ble is visible.
o
11. Lift Cylinder:
Properly secured; no visible damage;
no evidence of leaking from the cylinder; properly
lubricated.
o
12. Rear Axle Stabilizer Cylinder:
Properly secured; no
visible damage; no evidence of leaking from the
cylinder; properly lubricated.
o
13. Slave Cylinder:
Properly secured; no visible dam-
age; no evidence of leaking from the cylinder; prop-
erly lubricated.
o
14. Stabilizer Switch:
Properly secured; no visible dam-
age; no loose or disconnected wires.
o
15. Boom Pivot Assembly:
Properly secured; no visible
damage or excessive wear; properly lubricated.
o
16. Boom Hydraulic Hoses:
No visible damage or exte-
rior wear; no evidence of leaking.
o
17. Rear Light Assembly:
Properly secured; no visible
damage; no loose or disconnected wires; no malfunc-
tions.
o
18. Hydraulic Control Valve Assembly:
No loose or
missing parts; no evidence of leaking; no damaged or
leaking hoses.
o
19. Exhaust System:
No loose or missing parts; no visi-
ble damage; no obstructions to the outlet.
o
20. Hydraulic Cooler:
No loose or missing parts; no vis-
ible damage; no evidence of leaking; cleanliness;
o
21. Engine Compartment:
o
Engine oil level, add if needed;
o
Coolant level, add if needed;
o
No evidence of engine oil or coolant leaks;
o
Belts and hoses in good condition, properly secured
and adjusted
o
22. Boom Hose Guards:
Properly secured; no visible
damage.
o
23. Engine Air Filter:
No loose or missing parts; no vis-
ible damage; no obstructions to the evacuator; pre-
cleaner free from dirt; restriction indicator proper
reading.
o
24. Battery Compartment:
Proper electrolyte level; no
loose or damaged cables; no visible damage or corro-
sion.
o
25. Fuel Tank:
No visible damage; no evidence of leak-
ing; level of fuel; breather cap secure and working.
o
26. Mirror Assembly:
No loose or missing parts; no vis-
ible damage; properly adjusted.
o
27. Hydraulic Oil Reservoir:
No visible damage; no
evidence of leaking; recommended oil level; breather
cap secure and working.
o
28. Cowling and Latches:
All cowling, doors and latch-
es in working condition; properly secure; no loose or
missing parts; all components operate properly.
o
29. Frame Tilt Cylinder:
Properly secured; no evidence
of leaking; properly lubricated.
o
30. Frame:
No visible damage; no cracked welds; no
loose or missing parts.
o
31. Tilt and Auxiliary Hydraulic Hoses:
No visible
damage or excessive wear; no evidence of leaking.
o
32. Attachment Tilt Cylinder:
Properly secured; no vis-
ible damage; no evidence of leaking from the cylin-
der; properly lubricated.
Date: _________________Initials: _______________
