Manitou MT 732, Operator'S Manual

Page: 133 / 138

4 - 5
INTRODUCTION
- Your lift truck must be used with interchangeable equipment. These items are called: ATTACHMENTS.
- A wide range of attachments, specially designed and perfectly suitable for your lift truck is available and guaranteed by MANITOU.
- The attachments are delivered with a load chart concerning your lift truck. The operator's manual and the load chart should be
kept in the places provided in the lift truck. For standard attachments, their use is governed by the instructions contained on this
notice.
We would remind users that the MT 928 Série C-E2, MT 932 Série C-E2, MT 932 Turbo Série C-E2, MT 1030 S Série 3-E2, MT 1030 S
Turbo Série 3-E2, are lift trucks essentially intended for handling. Occasional use with the buckets CBC 800/900 and CBR 900/1000 is
authorised, but under no circumstances is intensive use for difficult applications (quarry, waste, cereals, agriculture, etc) permissible.
In addition, use of the lift truck with the buckets CBC 800/900 and CBR 900/1000 should be with the jib completely retracted, in order
to reduce the constraints on the jib head.
Use of other buckets CBA, CBC, CBM, CBR, CB, CBG and manure forks FFGR is forbidden.
- Some particular uses require the adaptation of the attachment which is not provided in the price-listed options. Optional solutions
exist, consult your dealer.
Only attachments approved by MANITOU are to be used on our lift trucks (see: 4 - ADAPTABLE ATTACHMENTS IN OPTION ON THE RANGE:
TECHNICAL SPECIFICATIONS OF ATTACHMENTS). The manufacturer's liability will be denied in case of modification or of attachment
adaptation carried out without his knowing it.
Depending on their size, certain attachments may, when the jib is lowered and retracted, come into contact with the front tyres and cause
damage to them, if reverse tilt is activated in the forward tilt direction. TO REMOVE THIS RISK, EXTEND THE TELESCOPE TO A SUFFICIENT
EXTENT FOR THE PARTICULAR LIFT TRUCK AND ATTACHMENT SO THAT THIS CONTACT IS NOT POSSIBLE.
Maximum loads are defined by the capacity of a lift truck taking account of the attachment’s mass and centre of gravity. In the event of
the attachment having less capacity than the lift truck, never exceed this limit.