Manitou MC 18-2 D K ST5 S1, Operator'S Manual

Page: 86 / 120

Â
50H - WEEKLY SERVICE OR EVERY 50 HOURS OF SERVICE
CHECK Alternator belt tension
IMPORTANT
If the compressor belt has to be changed, check the tension again after the first 20 hours of operation.
- Remove the access panel 1.
- Check the belt for signs of wear and cracks and change if necessary ( FILTER
CARTRIDGES AND BELTS).
- Check the belt tension between the crankshaft and alternator pulleys.
- Under normal pressure applied by the thumb (98 N), belt movement A should be
between 10 and 12 mm.
- Carry out adjustments if necessary.
- Loosen screws 2 by two to three thread turns.
- Swivel the alternator assembly so as to obtain the required belt tension.
- Retighten the screws 2.
CHECK Tyre pressures
CHECK Wheel nut tightening
IMPORTANT
Check that the air hose is correctly connected to the tyre valve before inflating and keep all persons at a distance during inflation.
Inflate to the recommended tyre pressures.
- Check the wheel nut tightening. Non-compliance with this instruction can lead to deterioration and breakage of the
wheel bolts and distortion of the wheels.
- Check and restore tyre pressures if necessary ( 2 - DESCRIPTION: TYRES).
NOTE: There is an OPTIONAL wheel toolkit.
3 - 14
A
1
2
2
2
647837 M1 (A052020) MC 18-2/18-4 D K ST5 S1