Manitou MC 18-2 D K ST5 S1, Operator'S Manual

Page: 84 / 120

Â
10H - DAILY SERVICE OR EVERY 10 HOURS OF SERVICE
CHECK Lift truck environment
IMPORTANT
Follow the operator instructions ( 1 - OPERATING AND SAFETY INSTRUCTIONS: OPERATOR INSTRUCTIONS).
- Carry out a general inspection of the lift truck:
• Fluid leaks or stains on the ground.
• Additional object on the lift truck or in the overhead guard or the cab.
• Mounting and adjustment of lights and rear view mirrors.
• Mounting and locking of the attachment.
• Condition of the tyres, to detect cuts, blisters, wear, etc.
- According to the conditions of use and the environment, ensure that the lift truck is clean:
• Lights, rear view mirrors, windows, bodywork.
• Driver's cab (
OCCASIONAL MAINTENANCE).
• Engine housing and inside the frame ( OCCASIONAL MAINTENANCE) to prevent leaks and build-up of materials
(e.g. straw, flour, sawdust, organic waste, etc.).
IMPORTANT
Particular attention should be paid to accumulations of flammable materials and fuel or lubricant leaks. These significantly increase the risk of fire outbreaks.
CHECK Engine oil level
Place the lift truck on level ground with the engine stopped, and let the oil settle in
the sump.
- Open the engine cover ( 2 - DESCRIPTION - INSTRUMENTS AND CONTROLS).
- Pull out dipstick 1.
- Clean the dipstick and check the correct level between the two notches.
- If necessary, add oil ( LUBRICANTS AND FUEL).
- Remove the access panel 2.
- Add oil through filler port 3.
- Check for leaks.
3
1
2
3 - 12
647837 M1 (A052020) MC 18-2/18-4 D K ST5 S1