Manitou 150 AETJ C Operator'S Manual Download Page 74

Page: 74 / 100

2-42

DESCRIPTION AND USE OF THE OPTIONS

1 - S

AFE

YSTEM

The SafeManSystem option is a system used to disable all of the basket control panel
controls when activated by the lifting platform user.

OPERATION

- Each time the lifting platform is switched on, a system test is performed: there is a

beep and the blue warning light flashes.

- If the pressure-sensitive edge 1 is pressed, the system cuts all of the lifting platform

controls. The blue warning light and an audible alarm are activated.

- If the user releases the pressure-sensitive edge:

• By pressing the nacelle “OFF” rearming button 2 once, the user can regain

control of the nacelle controls. The blue warning light and the audible alarm
are turned off.

- If the user continues to press on the pressure-sensitive edge:

• By pressing the lifting platform “OFF” rearming button 2 once, the user

can regain control of the lifting platform controls. The blue warning light
and the audible alarm are turned off when the user releases the pressure-
sensitive edge.

647536

(10/04/2017)

150

AETJ

/ 170

AETJ

Summary of Contents for 150 AETJ C





































































































Search results

Summary of Contents for 150 AETJ C

Reviews:

Related manuals for 150 AETJ C

Brands by name

Popular brands

Manitou 150 AETJ C, Operator'S Manual

Search results

Summary of Contents for 150 AETJ C

Reviews:

Related manuals for 150 AETJ C

Brands by name

Popular brands