Manitou 150 AETJ C, Operator'S Manual

Page: 95 / 100

3-21
C7 - T
IGHTENING TURRET ROTATION MOTOR BOLTS
CHECK
- Set the platform on a horizontal surface.
- Open the left hand cowling.
- Check the tightness of the nine bolts 1 (Fig. C7/1).
- The tightening torque for the bolts is 8 daN.m ± 10%.
C8 -
T
URRET MOTOR BRAKE REDUCER
EMPTY - REPLACE
Set the platform on a horizontal surface.
- Remove the turret’s left cover.
- Remove the filling-breather cap 2 (Fig. C7/1) to ensure good drainage.
- Mark the drain plug 3 located on the bottom of the reducer unit (Fig. C7/1).
- Place a small receptacle to catch the oil.
- Loosen the drain plug.
Dispose of the oil in an environmentally friendly manner
- Use a syringe to fill the reducer via the filling-breather cap 2 (Fig. C7/1). The oil capacity
is 1.3 litres and the level is correct when the breather is full of oil.
- Re-insert the filling-breather cap 2 (Fig. C7/1).
C7/1
1
3
2
647536
(10/04/2017)
150
AETJ
C
/ 170
AETJ
L