background image

2-33

27 - 28 - 29 - 30 - 31 - 32 - M

OVEMENT

 

SELECTION

 

CONTACTOR

27 PLATFORM INCLINATION CONTACTOR

- Select the movement by pressing button 27; the movement remains selected while the 

LED is lit (8 seconds).

- Push (forward) or pull (backward) the switch control 25 to raise or lower.

NB : The basket can only be tilted when the machine is in transport position. (see USING 
THE ACCESS PLATFORM).

28 EXTENSION ARM LIFTING / LOWERING CONTACTOR

- Select the movement by pressing button 28; the movement remains selected while the 

LED is lit (8 seconds).

- Push (forward) or pull (backward) the switch control 25 to raise or lower.

29 TELESCOPE  OUTPUTS / INPUTS CONTACTOR

- Select the movement by pressing button 29; the movement remains selected while the 

LED is lit (8 seconds).

- Push (forward) or pull (backward) the switch control 25 to go out or go back.

30 SUPERIOR ARM LIFTING / RAISING CONTACTOR

- Select the movement by pressing button 30; the movement remains selected while the 

LED is lit (8 seconds).

- Push (forward) or pull (backward) the switch control 25 to raise or lower.

31 INFERIOR ARM LIFTING / RAISING CONTACTOR

- Select the movement by pressing button 31; the movement remains selected while the 

LED is lit (8 seconds).

- Push (forward) or pull (backward) the switch control 25 to raise or lower.

32 TRAVELLING CONTACTOR

- Select the movement by pressing button 32 briefly (See NB for button B) ; the movement 

stays selected as long as the LED is on (8 seconds).

- Push (forward) or pull (backward) the switch control 25 to advance or retract.

DIRECTION:
- TO STEER TO THE LEFT OR THE RIGHT WITHOUT MOVING IN TRAVELLING:

- Select the direction by pressing button B on the manipulator 25 (constant pressure) to 

the right or the left of the button to go respectively right or left.

- TO STEER TO THE LEFT OR THE RIGHT WITH TRAVELLING:

- Select the direction by pressing button B on the manipulator 25 (constant pressure) to 

the right or the left of the button to go respectively right or left.

- Push the manipulator (25) forwards or pull it backwards respectively to go forward or 

reverse while steering the wheels.

NB :

 Pressing button B on the manipulator briefly also selects the travelling 

movement,

 the movement stays selected as long as the LED (same as contactor 32) is 

on (8 seconds).

27

28

29

30

31

32

B

25

647536 

(10/04/2017) 

150 

AETJ 

/ 170 

AETJ 

L

Summary of Contents for 150 AETJ C





































































































Reviews: