FRONT PANEL CONTROLS
F1
F7
F6
F10
F2
F8
F3
F9
F4
F5
F1: STANDBY / ON
After connecting the mains power, press this button to switch ON the receiver or to switch to STANDBY
F2: DIGIT LED DISPLAY
This will display the current channel or certain programming functions when using the menus. In standby mode this will
display the time.
F3: REMOTE CONTROL SENSOR
Location of the infrared receiver. Ensure that this is not obstructed when using the remote control.
F4: TV / RADIO
Press this button to change from TV channels to RADIO channels and vise versa.
F5: MENU
Press this button to access the programming menus. To exit the menus press it again.
F6: OK
In viewing mode press this button to display channel list. In menu mode this button is used in conjunction with the menu
functions to change or enter the programming parameters.
F7: CH UP
In programming mode this button will move the cursor (highlighted) upwards to facilitate selection. In normal operation
mode it is used to step up channels sequentially.
F8: CH DOWN
In programming mode this button will move the cursor (highlighted) downwards to facilitate selection. In normal operation
mode it is used to step down channels sequentially.
F9: VOL UP
In programming mode this button will move the cursor (highlighted) to the right to facilitate selection. In normal operation
mode it will increase the sound .
F10: VOL DOWN
In programming mode this button will move the cursor (highlighted) to the left to facilitate selection. In normal operation
mode it will decrease the sound.
6
