M&V S.r.l.
Via L. Guerra, 9
80040 Cercola (NA)
Ph./Fax +39 0815552428
e-mail:
© M&V S.r.l.
vesuvius userguide10 June 2015.doc
Page 4 of 24
Information Technology Solutions
V
ESUVIUS OWNERS MANUAL
Unpacking the Vesuvius
The Vesuvius comes in a special protective wooden
case, this item has been designed to not only protect
the Vesuvius, but when disassembled folds flat to
allow the Vesuvius to be repackaged for
transportation at any time. To remove the Vesuvius
from the case the following unpacking procedure
should be used.
1.
All 4 screws securing the lid should be
removed. There are 1 on each side shown
by the arrows, 4 in total.
Note: they are
NOT on the top.
2. The sides of the crate are secured by 4
metal clips, each held in place by a screw
that should be removed.
3. Remove the clips
The sides of the case can now be lifted away from
the base and the sides folded flat for storage.
The Vesuvius is secured to the base using rubber
transit feet with bots on the bottom that protrude
through the case and are secured with 4 wing nuts,
these must be undone. .
Once the wing nuts have been undone, the machine
will lift away from the base and will have 4 soft
rubber transit feet attached. These feet should be
removed.
