Operating instructions
• This appliance is intended to be used in
household and similar applications such as:
͵ Staff kitchen areas in shops, offices and
other working environments;
͵
Far houses;
͵
By clients in hotels, motels and other
residential type environment;
͵
Bed and breakfast type environments.
• Keep the appliance and its cord out of reach of
children less than 8 years.
• Before cleaning, always unplug the appliance
from the power supply. Keep the plug dry use
again after clean.
• Never use the appliance outside and always
place it in a dry environment.
• If the supply cord is damaged, it must be
replaced by a special cord or assembly
available from the manufacturer or its service
agent.
• Regarding the details of the cleaning method
for this appliance, please refer to the section
“CLEANING AND MAINTENANCE”.
• Plug the power plug into a suitable outlet.
•
An acoustic signal sounds, the control lamp ON/STANDBY lights
up. Now the unit is in standby mode.
•
Under the standby mode: the LED indicator will show letter “L”,
this means the temperature of the ceramic glass plate is lower
than 50°C. If the temperature of the ceramic glass is higher than
50°C, the LED indicator will show letter “H”.
• Place suitable cookware in the center of the stove.
•
Now press the ON/STANDBY switch to turn the induction stove
on, the control lamps “HEAT” and “TEMP(°C)” blink. If the “HEAT”
or “TEMP(°C)” key aren’t pressed, the unit will enter into standby
mode after 30 seconds.
•
Remark: Appliance will turn off automatically after 2 hours
without operation.
Specifications
• Rated Power :
3400 W
(Left stove: 1400W, Right stove: 2000W)
• Rated Voltage:
220-240V~ 50-60Hz
• Temperature:
60°C – 240°C
• Max current:
15A
Congratulations
Congratulation on your purchase. For a better use of your new
device, we recommend you to read carefully this user manual and
keep it for record.
GB-4
GB-5
