Error code list
• If LED-display shows the error code, please reference to the
solution as following.
Error Code
Cause and Solution
The unit is in standby
mode, but the LED-
display shows “---”,
and the unit sounds
“Dee, Dee, …”
1) You are using the cookware without the
magnetism bottom or the diameter of the
bottom is less than 14cm. Please use the
cookware with magnetic and flat base,
such as the iron or cast iron cookware,
the cookware with a 18/0 stainless steel
base. And all cookware with a base whose
diameter is 15 to 22cm.
The device will enter into standby mode
after 10 second without the suitable
cookware.
Press ON/STANDBY to restart the unit.
2) After press ON/STANDBY press HEAT or
TEMP key to turn on the unit.
E01
Voltage is under 145V
E02
Voltage is over 275V
E03
The accessory and spare parts are damaged,
please contact the nearest authorized
service facility for trouble shooting,
repair and adjustment.
Error Code
Cause and Solution
E06
The accessory and spare parts are damaged,
please contact the nearest authorized
service facility for trouble shooting,
repair and adjustment.
E07
The appliance is too hot. The cooking
temperature is over 240°C. After the unit
has been cooled down (at least 30mins), the
unit would be automatic switches to standby
mode. Press ON/STANDBY to restart the unit.
E08
The accessory and spare parts are damaged,
please contact the nearest authorized
service facility for trouble shooting,
repair and adjustment.
GB-8
GB-9
