![background image](http://html1.mh-extra.com/html/mandik/monzun/monzun_installation-and-operation-instractions_4012406015.webp)
MANDÍK, a. s., Dobříšská 550, 267 24 Hostomice | www.mandik.cz
|
15
®
EN
Notice:
When the burner is running, it is necessary to avoid shutting down
the electric power supply! This can lead to overheating of the ex-
changer through thermal inertia – it does not cool down. In case of
overheating of the heater (failure of the air blower, thermostat of the
burner, closed blinds, failure of the electric current during the oper-
ation of the burner…) and subsequent blocking of the emergency
thermostat let the heater cool down, remove the fault and unlock
the thermostat (unscrew the cover of the emergency thermostat and
use a tool (rod, screwdriver, …) Press the unlock button), in case of
failure or repetition of the fault, contact the service organization or
the manufacturer.
Under no circumstances must the flue pipe be blocked or blocked or combustion air drawn in
INSTALLATION AND DISASSEMBLY OF COMPONENTS
ALL PROFESSIONAL WORK MAY ONLY BE PERFORMED BY A SERVICE TECHNICIAN WITH THE RELEVANT CERTIFICATE
AND AUTHORIZATION FROM THE COMPANY MANDÍK, A S
Burner assembly removal:
1. Disconnect the MONZUN heater from the electrical network and
close the gas supply.
2. Remove the door of the burner box.
3. Disconnect the internal gas hose.
4. Disconnect the cable connectors from the burner fan.
5. Disassemble the burner assembly.
6. Install in reverse order and perform a leak test.
Electrodes removal and adjustment:
1. Disconnect the MONZUN heater from the electrical network and
close the gas supply.
2. Remove the door of the burner box.
3. Disassemble the electrodes with cable located on the torch holder.
4. Install in reverse order and check that the electrodes are set
correctly, adjust the distance between the electrodes. Check the
function of the device.
ION
– Ionisation electrode
SPG
– Ignition electrode
Pic 14:
Electrodes adjustment
Burner fan removal:
1. Disconnect the MONZUN heater from the electrical network and
close the gas supply.
2. Remove the door of the burner box.
3. Disconnect the cable connectors from the exhaust fan.
4. Disassemble the burner assembly.
5. Disassemble the burner fan.
6. Install in reverse order, replace fan seal.
Control automatic removal:
1. Disconnect the MONZUN heater from the electrical network and
close the gas supply.
2. Remove the door of the burner box.
3. Disconnect the cable connectors of the control automatic.
4. Disassemble the control unit.
5. Install in reverse order and check the function of the device.