27
4.13.
Assembly and disassembly of the last pair of bodies
Ploughs marked with the 3+ and 4+ symbol can be
fitted with a bar with a pair of plough bodies.
Before commencing assembly or disassembly,
place the plough stably on an even/firm surface.
Use lifting and transport means for work. The
weight of the complete
unit ranges from 210
-
265
kg depending on the equipment bolted to it.
Before starting the assembly, remove the plastic
cap. The bars are bolted together using six M20x65
screws. The complete set should include M20 nuts
and Z 20.5 spring washers.
A spring protection is available on
ORKAN RESOR implements which,
compared to ORKAN and ORKAN
VARIO machines, allows the body to
rise automatically when it hits an
obstacle, and then return to the
working position on its own. ORKAN
RESOR
ploughs are equipped with a
7 leaf spring.
The length of the spring which
should be measured between the
pins should be about 700 mm.
Length changes can be made using
the screw shown in the figure
opposite.
CAUTION! Changing the length of the spring does not change the trigger
force, this can only be achieved by adding or removing spring leaves.
Screw
4.14.
Spring protection
Spring length
adjustment
screw
Bolted bar
