Mandalay 2006 Presidio, Manual

Page: 40 / 130

NOTE: The front end alignment of the motorhome has been set by the motorhome
chassis and body builder to the specification for the front and rear GVW of the
motorhome. However, since alignment is affected by not only how much weight you
add to the motorhome in the way of cargo and how you disperse the cargo, we advise
you to have the motorhome alignment checked in the loaded condition (the way you
would travel down the road). Not having the alignment set in the loaded condition
could result in abnormal tire wear.
Full operating and service information may be obtained by consulting the engine and drive
train operating and service manuals provided by the chassis manufacturer. For maximum
engine efficiency and long service life, always follow recommendations, as outlined by the
chassis manufacturer. Regular visual inspections can help detect minor adjustments and
needed maintenance. All other components of chassis should be inspected regularly per
schedules set by chassis manufacturer.
WARNING: Ethylene glycol is a petroleum derivative which can ignite if
exposed to high temperature, such as occurs on an exhaust manifold. The
possibility of ethylene glycol igniting is increased if it is not diluted with water.
It is important to properly dilute antifreeze with the proper mixture of water.
Make sure to discuss the coolant needs of the motorhome with the chassis
engine service representative.
The engine cooling system requires regular, periodic service to operate at maximum
efficiency. The condition of the engine coolant, hoses, and clamps should be checked
annually. Make sure to follow the cooling system recommendations as outlined in the
chassis engine owner’s manual. If you notice, or suspect cooling system problems, make
sure it receives immediate attention. Proper and safe operation of the chassis engine cooling
system and other chassis functions depends on maintaining the vehicle per the instructions
and schedules published by the chassis and engine manufacturers.
The engine fluid level checks which are located at the exterior rear of the motorhome, can be
accessed by lifting the top half of the engine grate. For service personnel, additional access
areas are located in the bedroom. The first location is in the wardrobe closet on the floor,
remove the four screws to remove the access panel. The second access panel is located on
the floor between the bed and the wardrobe closet. Remove the four mounting screws to
remove the access panel.
2-4
CHASSIS OPERATIONS & PROCEDURES
2005 PRESIDIO
POWER PLANT & DRIVE TRAIN
ENGINE COOLING SYSTEM
ENGINE ACCESS