Mandalay 2006 Presidio, Manual

Page: 102 / 130

SEALAND TOILET (39A & 39B Only)
How to Use:
• To add water to the toilet, lift or raise the flush lever
until desired water level is reached.
• To flush toilet, push lever all the way down until
contents leave bowl. Water flow pressures vary at
different locations, therefore holding the flush lever
down for 4-8 seconds may be required.
• Release flush lever by allowing it to snap back,
which permits positive sealing around the flush
ball.
• A small amount of water should remain in the bowl.
Unnecessary frequent flushing of the stool will quickly deplete your fresh water supply and fill
your holding tank. If the black water tank becomes full, you will no longer be able to flush the
stool until the tank can be drained.
NOTE: Refer to the Sealand Fine China Toilet Owner’s Manual for detailed information
regarding usage and maintenance of the toilet.
TECMA TOILET
How to Use:
• After flush button is pushed, bowl will begin to fill with water.
• Contents of the bowl will then be evacuated.
• A dry bowl will appear while a short flushing of the internal mechanism occurs.
• Bowl refill will automatically begin after several seconds. Once refill is complete, toilet
is ready to flush again as needed.
Water Refill Level Control:
• The water level refill is factory preset.
• This toilet has an adjustable dial, located
on the back side of the flush control
panel, to control the water refill level and
water usage.
• To adjust the water refill up or down,
adjust dial to desired level. Lower refill
levels will use less water and vice versa.
NOTE: Refer to the Tecma Silence Plus Owner’s Manual for detailed information
regarding usage and maintenance of the toilet.
8-6
WATER SYSTEMS
2005 PRESIDIO
TOILET