manualshive.com logo in svg

Mammut Barryvox-S, Reference Manual

Share
Download
Mammut Barryvox-S Reference Manual Download Page 7

EXTENDED REFERENCE GUIDE

BARRYVOX

®

S

7

INITIAL SETUP

Main Switch OFF / SEND / SEARCH

The main switch is located on the top side of the device. In the 
left position OFF, the device is turned off , in the center position 
SEND the device is in SEND mode and in the right position 
SEARCH, the device is in SEARCH mode. For safety reasons, it 
is required to press the hinged unlock button to leave the SEND 
mode. To return from SEARCH to SEND, simply push the main 
switch sideways.
Always make sure that the switch locks into position mechani-
cally to avoid an undesired change of mode.

User Interface and Use of Buttons 

The Barryvox

®

S uses an easy navigation based on three 

buttons: The two scroll-bar buttons located on the side and the 
orange 

 button on the front. To scroll up or down in any 

menu or list, use the up and down buttons on the side. To con-
fi rm your selection, use the orange 

 button on the front. 

The action triggered by pressing the 

 button is shown in 

menus or in the softkey bar at the bottom of the screen. 
 

Samples:
Press the 

button to…

…confi rm your selection. 

SEARCH –> SEND

SEND –> OFF

OFF –> SEND

SEND –> SEARCH

Summary of Contents for Barryvox-S







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands