manualshive.com logo in svg

Mammut Barryvox-S, Reference Manual

Share
Download
Mammut Barryvox-S Reference Manual Download Page 50

EXTENDED REFERENCE GUIDE

BARRYVOX

®

S

50

SEARCH

Alternative Search Mode

In the alternative search mode, the transceiver shows distance 
and direction to the subject with the strongest signal and 
provides an analog tone. The alternative search mode is mostly 
used when a clear separation of multiple burials is no longer 
possible in the digital standard mode.

Switching from standard mode to alternative search mode is 
achieved by scrolling to the magnifying glass symbol   and 
selecting “Alternative”. 

Leave alternative search mode by pressing the 

-key.

Multiple Buried Subjects  
in Alternative Search Mode

If multiple burials are detected in alternative search mode, an 
icon symbolizing multiple burials is shown on the display . 
Additionally, you can also hear the analog tones. These are 
helpful in distinguishing the signals acoustically. 

The device 

favors the closest subject.

 

The detection of multiple burials may vary based on the 
subject’s orientation and distance relative to the rescuer. Turn 
off the transceivers of the excavated subjects to facilitate 
the further search. If you don’t know the number of buried 
subjects, you must search the entire avalanche path using the 
search patterns described in the chapter «Signal Search». 

Summary of Contents for Barryvox-S







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands