manualshive.com logo in svg

Mammut Barryvox-S, Reference Manual

Share
Download
Mammut Barryvox-S Reference Manual Download Page 57

EXTENDED REFERENCE GUIDE

BARRYVOX

®

S

57

ADDITIONAL INFORMATION

Use in combination with the Barryvox

®

 

 Maintenance Software

The Barryvox

®

 Maintenance Software allows to efficiently 

manage, configure and maintenance transceiver fleets with a 
computer. The Barryvox

®

 S automatically connects to a service 

device (Barryvox

®

 tester, W-Link Adapter/Stick) with in w-link 

range (approx. 50m). In service mode, the serial number is 
shown on the screen. While in service mode, the SEND mode is 
deactivated and the red SEND-control LED is double flashing.

Periodic check by a Barryvox

®

 Service Center

To check the proper function of the device it is highly recom-
mended that the device be sent to a Barryvox

®

 service center 

every 3 years, or when reaching 3000 hours of operation or 
have it checked by a Barryvox

®

 service point (service charge 

will apply). The functional test is much more comprehensive 
and precise than the self and group check. As part of this 
service the electronics and the mechanical components such 
as the case, the main switch and the lateral key, the battery 
contacts, the battery compartment and cover as well as the 
wrist strap will be checked. In case the check shows abnormal 
wear and tear due to incorrect or long, very intense use, the 
service center may recommend that you replace the device.

We recommend that you have your device checked during the 
summer months so that your Barryvox

®

 is tested and ready to 

use at the start of the next winter season. In the “Maintenance” 
tab which you may access when shutting down the transceiver, 
you can see when the next check is due.

Summary of Contents for Barryvox-S







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands