Names of Parts – Roll Film Holder
1.
Coupling Pin
2.
Electrical Contact
3.
Detach Lock Release
4.
Detaching Button
5.
Back Cover Lock Release
6.
Back Cover Button
7.
Body Coupling Gear
8.
Bottom Body Coupler
9.
Dark Slide
10. Film Speed Dial
11. Film Counter Window
12. Rubber Finger Rest
13. Dark Slide Storage Slot
14. Memo Clip
15. Manual Film Advance Knob
Names of Parts – Roll Film Insert
16. Start Mark
17. Leader Guide Mark
18. Film Type Index
19. Film Spool Stud
20. Spool Clip
21. Release Latch
22. Take-up Spool Stud
Attaching the Roll Film Holder
1.
Remove the rear Body Cap from the camera
2.
Hold the Roll Film Holder at its Rubber Finger Rests (12)
3.
Position and hook the holder’s Bottom Couplers (8) to the camera’s mounting bracket
4.
Push the upper part of the holder against the camera body while pushing the holder downward until
it clicks and locks into place. Make sure that the holder’s Mounting Hook securely catches the
grooves of the upper part of the holder
