mamivac Lactive 287000, Operating Instructions Manual

Page: 23 / 132

9.
Errors and solutions
The protective diaphragm effectively prevents that liquids or solids are sucked into the
pump. If substances are sucked in nevertheless or any other problem occurs, immediately
put the device out of operation. Contact your dealer or the customer service of your shop.
The breast pump/power unit must not be opened by users/patients. The device is
maintenance-free. For repair work, the device must be returned to the manufacturer.
10. Environmental protection and disposal
Please dispose of a disused mamivac
®
LACTIVE breast pump in accordance with your local
disposal regulations for electrical devices.
11. Technical data
The expected service life is 2 years.
mamivac LACTIVE REF 281024
Nominal voltage: 12 V DC
Power consumption: 1.00 A
H x W x D (mm): 115 x 125 x 195
Weight: 630 g
Max. vacuum: -33 kPa (± 15%)
Mean vacuum: Device for intermittent sucking without continuous vacuum
Power supply unit REF 283005
Nominal input voltage: 100-240 V AC 50 / 60 Hz
Output voltage: 12 V DC
Protection class: II
12. Conversion table of units
1 kPa corresponds: 0.01 bar
0.14504 PSI corresponds: 7.5006 mmHg
(pounds per square inch) (millimetre mercury, at 0°C)
- 23 -
Device classification:
Classified acc. to 93/42/EEC:
Article 9, Appendix IX:
Class IIa/Rule 11
Problem Error/solution
Pump does not start - Check connections of power supply.
- LED on power unit must light (if existing).
- If the problem is not solved, please contact the customer
service of your shop.
Pump does not suck
(does not build up
vacuum)
- Switch off and on the device several times.
Wait a minute before switching on again.
- Check the respective suction kit for proper assembly.
- Check tube valve (for cracks and dirt).
- Check protective diaphragm for cracks.
- Protective diaphragm must be inserted flush and crinkle free.
- Check hose connections.