Mami Robot PPORO, User Manual

Page: 17 / 32

Operating Mamirobot
1. Press the Main Power Button on the main body. Mamirobot is turned on and becomes standby status.
2. In stand-by status, Mamirobot start cleaning with pressing the Main Power Button or Start/Stop Button on the remote control.
Default cleaning time is 1 hour.
3. For changing the cleaning time, press Cleaning Time Control Button on the main body or on the remote control. Each time the
Cleaning Time Control Button is pressed, working time is selected as ‘Continuous’, ‘60 min’, ‘30 min’ as shown in Figure. After
selecting with preferred cleaning time, start cleaning by following the step 2.
4. When you press Auto-Recharge Button on main body or on the remote control, Mamirobot stops it’s work and returns to the
charging station to recharge its battery. (K5, K7)
5. When the residual battery power runs out, [doc] is shown in status display with beep. The machine goes for recharging to the
charging station automatically. (K5, K7)
6. Mamirobot will be turned off automatically by pressing the Main Power Button 2 seconds.
7. When no key is pressed in 2 minutes in stand-by status, Mamirobot is automatically turned off. (If Mamirobot is docked with
charging station, stand-by status will be held.)
8. If you will not use the machine for a long time, remove the battery from machine.
Reserve 60minutes when turn on
the power. Long-lasting 30minutes Repeat pressing button
● ●● ●●●
or
CLEANING
17
Before using
Preparing
Cleaning
Guidance
Zaaloo
Product Infor
mation