Mami Robot PPORO, User Manual

Page: 16 / 32

Remote Controller
1. Lift the battery cover at the back of the remote control, and install the batteries into the
remote control with the right polarity as shown in figure. Close it until it clicks into place.
2. For using remote control, press the main power button on the Mamirobot to stand by.
3. If the remote control does not work, check the batteries for wrong direction or make sure
the main machine’s status is stand-by. Sometimes the battery may be discharged due to its
distribution. In this case, try again with other batteries.
Start/Stop Button
This button is to start operating or stop
operating. This button can be used for
returning to initial state during operat-
ing.
Auto-Recharge Button
When this button is pressed, Mami-
robot stops its work and returns to
the charging station to recharge its
battery. If you press the other buttons
while it is returning to the charging
station, Mamirobot will operate those
selected functions by priority.
Quite Mode Button
When this button is pressed, voice
announcement is stopped and operat-
ing noise becomes smaller. However,
sound of alarm will be operated during
silent mode. When the machine stops
and restarts, the silent mode will be
canceled.
Operation/Pause Button
This button is to start operation and
pause operation. Also can stop direc-
tion command pressing this button.
Directional Button
(
▲,▼,◀,▶
)
By using the directional button, you
can move Mamirobot to clean a prefer
location directly. These buttons func-
tion with Forwards, Left (move forward
after turn left 15°), Right (move for-
ward after turn right 15°)and Back-
wards (move forward after turn right
180°).
Cleaning Time Control Button
Each time the Cleaning Time Control
Button is pressed, working time is
selected as ‘30 min’, ‘60 min’, and
‘continuous’.
Schedule Cleaning Time Button
When this button is pressed, Time de-
lay is increased as ‘2 hours’, ‘3 hours’,
‘4 hours’... up to ‘12 hours’. You can
also increase and decrease time de-
lay by pressing Directional Buttons
(
▲,▼
). Scheduled cleaning function
is only performed when Mamirobot is
docked with the charging station.
SSW Mode Button
SSW(Spider Spinning Web) is for the
perfect cleaning mode. It indicates the
size of the room and operates. Each
time this Button is pressed, cleaning
mode is selected as ‘SSW’, ‘Normal’.
Mop Cleaning Button
Select this function if you want to clean
with damp cloth without suction. Side
Brush works.
Turbo Mode Button
Select this function at particularly dirty
place and intensive.
Hair Mode Button
Use this mode for hair and pet’s hair
cleaning. Please separate main brush
and install proper cover for this mode.
Intensive Cleaning Button
Select this function for intensive clean-
ing around particularly dirty area.
Corner Cleaning Button
Select this function for intensive clean-
ing around the corner and the edge.
16
Before using
Preparing
Cleaning
Guidance
Zaaloo
Product Infor
mation