Flip the drawer upside down and
slide the bottom panel (E) into
the slots on the side panels (C,D).
Bottom-Back View
A
C
D
E
G
F
3
2
To assemble the drawers, attach the side
panels (C,D) to the front and back panels
(A,B) with 50mm screws (1) and a
screwdriver.
ATTENTION: Before attaching the side panels,
make sure the middle hole is placed on the back
of the side panels, and the grooved slot is on the
bottom and facing inward.
Repeat steps 1-3
to assemble all remaining drawers.
Using a screwdriver, attach the edge and middle support braces
(F,G) to the bottom of the drawer with 32mm screws (2). Then
attach the drawer wheels (4) with 16mm screws (3) and a
screwdriver.
F
B
1
4
Middle hole
ATTENTION: Pre-drilled holes should be
exposed before tightening 32mm screws (2).
WATSON
BED FRAME ASSEMBLY (QUEEN)
