ATTENTION: Keep leg adjusters 0.25”
from the floor.
Attach the side rails (O) to the head rail (K)
and foot rail (L). Then finish tightening the
short bolts (7) with the 70mm Allen key (8).
Slide all drawers into place then install
the drawer stoppers (11) on the back of
the drawer side panels (E,F).
Slide center support rail (Q) into the head rail
bracket (K) and foot rail bracket (L). Using a
screwdriver, secure the center support rail (Q)
with 25mm screws (10).
Attach leg adjusters (12) to the support legs
(R). Then secure the support legs (R) to the
center support rail (Q) with medium bolts (13)
and the 100mm Allen key (6).
L
K
o
6
13
Q
R
12
11
10
Q
Q
WATSON
BED FRAME ASSEMBLY (FULL)
