Flip the drawer upside down and
slide the bottom panel (G) into
the slots on the side panels (E,F).
Bottom-Back View
Side Drawers
C
A
E
F
G
J
D
H
3
2
To assemble the foot drawers, attach the
side panels (E, F) to the front and back
panels (A,B) with 50mm screws (1) and a
screwdriver.
ATTENTION: Before attaching the side panels,
make sure the middle hole is placed on the back
of the side panels, and the grooved slot is on the
bottom and facing inward.
ATTENTION: Pre-drilled holes should be
exposed before tightening 32mm screws (2).
Middle hole
Repeat steps 1-3
to assemble all
remaining drawers. To build the side
drawers, replace front, back, and bottom
panels (A,B,G) with the side drawer
front, back, and bottom panels (C, D, H).
Using a screwdriver, attach the edge and middle support braces
(
I
,J) to the bottom of the drawer with 32mm screws (2). Then
attach the drawer wheels (4) with 16mm screws (3) and a
screwdriver.
I
I
B
1
4
WATSON
BED FRAME ASSEMBLY (CAL KING, KING)
