ATTENTION: Pre-drilled holes are on the back of
the side rail support legs (P).
Attach all four corner legs (M) to the head rail (K) and foot
rail (L) with long bolts (5) and the 100mm Allen key (6).
With the remaining long bolt (5), attach the foot rail center
leg (N) to the middle of the foot rail (L).
Place short bolts (7) in the holes on each side of the head rail (K) and
foot rail (L). Then loosely tighten each bolt with the 70mm Allen key (8)
until the bolts are partly visible.
Insert wooden dowels (9)
into the holes on the side
rails (O). Attach the side rail
support legs (P) by pushing
them onto the wooden
dowels (9). Then secure
them to the side rails
(O) with 25 mm screws (10)
and a screwdriver.
K
M
5
K
8
7
L
P
10
9
o
6
6
L
5
N
WATSON
BED FRAME ASSEMBLY (FULL)
