D)
Editing a recipe than the standard factory settings
.
1-Follow the four steps of section
“A”
2-
Press button 2
3-
Press button 6
4-
Starts to flash
P
and
P01
5-
Press the
+
button to get the recipe chosen (the oven is equipped with 32
programmed recipes (
P01 ... P32
)
6-
Press button 6 to confirm the recipe or wait 5 seconds for the automatic
confirmation
7-
Press the
ENTER
button (6) for at least 3 seconds
8-The words "
Func PRE
" blink in the display
9-
Press the
"+"
button to select the function you want to use for pre-heating the
oven
10-
Press the 6 button to confirm
11-
the temperature indicator flashes
12-
press the
"+" / "-"
to set the preheating temperature.
13-Press button 6 to confirm
14-
On the display the preheating duration flashes
15-
Press the
"+" / "-"
to change the duration of the preheating
16-press button 6 to confirm
17-
The abbreviation "
Func F1
" that identifies the cooking sequenceimmediately
compares next to the preheating
18-
Follow the instructions from step 9 to step 14 to confirm the characteristics of
the area (Function, temperature and time)
19-
The oven prompts you to set / change a maximum of 5 consecutive sequencesof
cooking known as
F1-F2- F3-F4-F5
NOTE: If you want to exclude one or more cooking sequence, when asked
to take on the index function, set "
00
" using the
"+"
and
"-"
.
20-
After setting the oven shows "
NO DEF
"
21-Press the 6 button to confirm the changes
E)
Restoring the recipe according to the factory settings
1-If you want to return the prescription to the factory, go over the instructions from
step 7 to step 17. At the request of the "
DEF NO
" press the
"+"
2-"
SURE DEF YES
" appears flashing
3-
Press the 6 button to confirm the reset factory settings of the individual recipe
30
