.
.
➢
SETTINGS AND TEMPERATURE CHANGES
The temperature can be changed at any time after choosing a cooking function by
simply pressing the 4 key
.
On the display, the temperature and corresponding flash
.
Use the 4 and 5 keys
to set the desired temperature and confirm with the 6 key
In any case, after 7 seconds of command inactivity, the temperature chosen is
automatically confirmed (auto-confirm).
You can also access the temperature change using the 2 menu key
Set it on the temperature function: the switch is highlighted by the temperature icon
flashing .
To select the desired temperature, use the 4 and 5 keys
6 key
or after 7 sec it will be auto-confirmed.
PRESET TEMPERATURE
and then confirm with the
The preset temperature assigned to each function can be changed.
Using the 4 key
(or the 2 menu key
), go to temperature change mode and set the
new preset temperature.
While the display is flashing (and thus within 7 sec), confirm the value by holding down
the 6 key
for at least 3 sec. The next time the oven is turned on the new preset
temperature will be active.
➢
OVEN PRE-HEATING
Once the cooking function and temperature has been chosen, the 3 START key
enters cooking mode and the oven starts the pre-heating phase.
The rising temperature icon starts to flash
and the status
shows the
temperature reached inside the oven. Once all the bars on the graph are full, a long
audible signal indicates that the set temperature has been reached inside the oven and the
rising temperature icon no longer flashes.
The stabilised temperature icon appears in its place
At this point the oven maintains the set temperature inside the cavity. If oven
temperature changes are made, the
rising temperature and
falling temperature
icons are activated.
15
