Malloca MDH-02I, Operating And Installation Instructions

Page: 54 / 72

54
Safety features
Overheating protection
The induction coils and the cooling element of the eletronic are fitted with a over -
heating protection feature. This prevents the induction coils and cooling element
from overheating.
This mechanism works on the affected heater or on the entire hob in the following
ways:
- If the booster function is being used, it will be switched off.
- If an induction coil is affected, the heater will automatically turn off. 0 and the
residual heat indicator will show in the display.
The heater can used again as soon as it has cooled to a safe temperature.
- If the cooling system is affected, all heaters will automatically turn off, and the
display will show 0 alternating the set power level.
Once the system has suffiencently cooled, the heaters will automatically operate
at the originally set power level.
Overheating can be caused by:
- heating an empty pan.
- fats or oils being heated on the highest power setting.
- there being insufficient ventilation to the under side of the hob
If the overheating protection mechanism triggers again, contact Malloca Techini -
cal Service.