Malloca MDH-02I, Operating And Installation Instructions

Page: 15 / 72

15
Installation
Feed the hob connection cable down through the cut-out.
Place the hob centrally in the cut-out. When doing so make sure that the seal
under the cooktop sits flush with the countertop on all sides. This is important to
ensure an
effective seal.
(Do not use sealant).
Connect the hob to the main power supply.
Turn the hob on and check the function.
The hob must not be permanently sealed into the countertop when installed. The
sealing strip under the edge of the hob provides a sufficient seal for the counter -
top.
If the hob is sealed into position, the countertop or appliance could be damaged
if the hob needs to be removed for maintenance or service.
Safety Instructions for installation