Malloca MDH-02I, Operating And Installation Instructions

Page: 51 / 72

51
Use
Timer
The hob has a timer which can be used to automatically switch-off one (any)
heater.
Quick Guide:
Setting the timer
The timer can be set with the hob turned on. It can be set from 1 to 99 minutes.
Touch [-] or [+] touch control to turn the timer on.
The display shows 00.
Touch the [-] or [+] to select the heater on which the timer function is to operate.
The selection of a heater of a new heater disables the previous selection in such
a way that the timer only operates on one heater each time.
The heater must always be selected before the time is set; otherwise, the timer
will switch off.
If, after selecting the heater, the time is not defined (T=00) in 10 sec., the timer
switches off.
The set time counts down in minutes in the timer display. The remaining time is
displayed and can be changed at any time by pressing [-] or [+].
After the set time has elapsed the display shows 00 and an audible signal is
heard. After a few seconds the tone will stop and the 00 will go out.
To end the signal select the [-] or [+] touch control.
Turn on Touch [-] or [+]
Set
With [-] set from 99 to 00 minute
With [+] set from 00 to 99 minutes
Reset back to 00 Touch [-] and [+] simultaneously