MALLINCAM SDI User Manual
November 11, 2014
SDI User Manual
Page 26
IR-LED
Not available on the Mallincam SDI
ANTI-SAT.
This control runs in conjunction with the
IR-Led, but since this Mallincam SDI
doesn’t have IR LED’s, then this control
does affect the image (unless looking at
an IR source).
EXTERN S/W
Not available on the Mallincam SDI.
AGC THRES
The DAY&NIGHT switch depends upon
the AGC level that is used to increase
the brightness of the image. The higher
the value then the darker the image is
required to be before the switch takes
place.
AGC MARGIN
Defines the difference between the Day-
to-Night or Night-to-Day switch based
upon the AGC THRES. Higher values
increase this distance, thus preventing a
continuous Switching
DELAY
You can choose MIDDLE, HIGH, and
LOW to set the Delay time for the
switching.
Summary of Contents for SDI Camera
Page 59: ......
