All Sky User Manual
October 11, 2014
All Sky User Manual
Page 7
2.
Making Connections
The All Sky Camera
(Connection Diagram)
Connecting All Sky to Monitor
The MallinCam All Sky provides a BNC Video-Out
Adapter (yellow) that allow the video signal to be
distributed to Video monitors. This Video-Out
Adapter provides standard Composite video out by
the BNC connector on the back of the All Sky (
1 on
the above Connection Diagram
).
Composite Video
The Composite Signal is obtained by connecting the included 10m MallinCam
Video Cable from the Video-Out adapter of the All Sky to the Composite Video-
In Adapter on your monitor (
since in most monitors, the Composite Video-In
connector is a RCA style, MallinCam provides a BNC to RCA adapter to
facilitated that connection
).
To connect, just align the two little openings on the BNC cable (
male
) with the
two notches on the adapter’s BNC (f
emale
) connector, push and twist so the
notches slide into place. This locks the connector to the All Sky cable.
Power
The All Sky or All Sky Wired requires 12V 1amp power either from an AC to DC
converter or 12V DC power supply. Just connect power adapter into to Power In
port on the back of the All Sky or into the RED Power In connecter on the end of
the 10m cable on the All Sky Wired.
1
Video Out (BNC)
2
12V Power in (12V)
3
Control Adapter
①
②
③
Summary of Contents for All Sky
Page 77: ......
