Malibu Boats Boat, User Manual, Page: 80 / 206

2-14
MaliView Pre-Sets Screen
• Enter pre-sets using the “PRE-SETS” button.
• Press the “EDIT PRE-SET” button to edit the highlighted pre-set. (See MaliView Edit
Pre-Sets Screen.)
• The up and down arrows will allow you to highlight the desired pre-set.
• Use the “ON/OFF/ENTER” button to select and activate pre-set.
NOTES:
• The only way to stop a pre-set is to turn off “CRUISE” or change “PRESET.”
• Auto Wedge can only be turned on or off in the setup screen.
• Make sure you have a calibrated power wedge for correct operation.
• Ballast bars will disappear when the sensor is not present.
• The engine must be running for the wedge to move to a pre-set position.
SETUP
CRUISE
GAUGES
PRE-SETS
CRUISE
MEDIA
ON / OFF
ENTER
EDIT
PRE-SET
100
0%
HALEY WAKEBOARD
F C L R MLS RIDER
21.8
100
0%
ED SURF LEFT
9.8
100
0%
BLANK
MPH
15.0
STOW
STOW
STOW
100
0%
HALEY WAKEBOARD
F C L R MLS RIDER
21.8
STOW
Rider’s
selected
picture
Pre-set name
Pre-set Saved
Speed set point Ballast Pre-set
set points
Power
Wedge
Pre-set
set point
Indicates the
wake shaping
zone
Chapter 2_15.qxp_ Chapter 2 doc.qxd 6/30/14 3:06 PM Page 14